| 影响铜雕工艺品报价的有哪些方面？ |
| 添加时间：2019/5/22 11:54:38 浏览次数： |
| 1、铜雕塑的面积：铜雕塑的面积是铸造成本核算的最基本依据，如果按一平方米的面积来算的话，我们的铸造标准是每毫米厚度用铜水为21斤，一般人物雕塑的厚度在5mm厚度为宜。太薄容易变形，太厚成本加大(客户特殊要求除外)。 1. The area of copper sculpture: The area of copper sculpture is the most basic basis of foundry cost accounting. If we calculate it by the area of one square metre, our foundry standard is 21 kilograms of copper water per millimetre thickness. The thickness of ordinary figure sculpture is suitable for 5 mm thickness. Too thin and easily deformed, too thick cost increases (except for special requirements of customers). 2、铜雕塑的重量：如果雕塑重量有特殊要求的话，寺庙铜钟加工，报价也会有所区别。 2. Weight of Copper Sculpture: If the weight of the sculpture has special requirements, Temple copper bell processing, quotation will also be different. 3、铜雕的复杂程度：越复杂的雕塑，铸造难度越大，所用的工时也会增加，相应的费用也会增加。 3. Complexity of copper sculpture: The more complex the sculpture, the more difficult it is to cast, the more time it will take, and the corresponding cost will increase. 4、塑形费用：塑型费用主要跟图片的复杂程度相关，一般藏传佛像的塑造费用要高于汉传佛像的塑造费用，人物雕塑价格相对适中，但需看到实际图片后塑型师才能给出精准报价。 4. The cost of sculpture: The cost of sculpture is mainly related to the complexity of the pictures. shusongjiw.89ix.comwanquji.89ix.comgubinlongw.89ix.comGenerally, the cost of Tibetan Buddhist statues is higher than that of Han Buddhist statues. The price of figure sculpture is relatively moderate, xieliaoji.89ix.comshuzhiwaw.89ix.comshusongji.89ix.combut only after seeing the actual pictures can the sculptor give a precise quotation. 5、贴金/鎏金费用：贴金/鎏金费用主要依据铜雕塑面积计算，鎏金价格高于贴金价格。 5. Deposit/gold fee: Deposit/gold fee is mainly based on the area of copper sculpture, and the price of gold is higher than that of gold. |
| 上一页 钟作为佛事中重要的法器 |
| 下一页 常见的大钟有三种类别 |